Startruss 11 O4 Frame Kit

Description

The Startruss 11 is a cinelifter frame kit that was meticulously crafted through collaboration with the pilots and engineers from 2RAW Aerials. Its A-frame design. in conjunction with trusses. ensures remarkable stiffness while effectively managing weight. resulting in outstanding performance.

Features

Advanced Truss Arms

Over several month the team experimented with various different arm designs made out of flat carbon. Several concepts and different truss structures were tested until we found the optimal arms. The star designed combine with the trusses ensure great stiffness while keeping the weight down delivering exceptional results.

Aero Shell

The aeroshell doesn’t only make Startruss look unique but was engineered with the help of PHD students to controls the airflow around the body and within the drone. Air comes in via the intakes to cool the ESC and is pushed out via rear exhausts. As the speed of the drone increases the aero shell acts as an air divider. preventing air from hitting the flat top plate. The shell also helps to prevent dirt from getting into the electronics

Innovative Camera Mount

Startruss’ unique camera mount is unique to other mounts on the market. with 10-50degree viewing angles. The mount is formed from 7075 aero grade aluminium. raised up to remove props from view. but most importantly it is supported on both the horizontal and vertical axis to reduce payload resonances. As the camera angle increases for more speed so does the amount of support the mount provides.

Lowest Resonance – Highest Performance

Our Lab does a lot of experimenting with different shapes and material. T700 Toray Twill weave Carbon Fibre means you are guaranteed to be getting the very best quality material.

Specificaitons

Product Name: Startruss 11 Cinelifter Frame

Geometry: X

Wheelbase: 473mm

Frame Dimension: L334*W334*H87 mm

Arm Thickness: 7mm

Bottom Plate Thickness: 4mm

Upper Plate Thickness: 4mm

Max Flight Stack Height: 20mm

Max VTX Height: 45mm

Flight controller Mounting: 30.5*30.5 Φ3mm

VTX Mounting: 25.5*25.5 Φ1.6mm / 20*20 Φ2mm

Motor Mounting: 19*19 Φ3mm / 30*30 Φ4mm

Weight: 1146g

Compatibility: DJI O4 Air Unit Pro

Packing List

1 x Startruss 11 Cinelifter Frame

1 x TPU Set

4 x Battery Anti-slip pads

1 x Flight control adapter board

1 x Screw Bag

1 x XT90E-Male Plug

1 x XT30G-Female Plug

4 x Motor Wire Shield Tube

2 x iPex/UFL to Abgle RP-SMA Adapter Cable

2 x 20x400mm battery strap

2 x 20x500mm battery strap

Tolerance Note

Due to manufacturing processes. the thickness of our products may have a standard manufacturing tolerance of ±0.2mm. The size of the hole may have a standard manufacturing tolerance of ±0.1mm.